10 11
6. Connect the speaker cords. Connect the speaker
cord plug I on the upper part of the backrest to
the jack J on the back of the headrest. Connect the
other speaker cord plug K on the base to the jack L
on the lower part of the backrest.
Assembling Your Booster Seat
7. Check your work. Inspect the booster seat to make
sure the headrest is securely attached to the backrest,
the seat pad is hooked into place, the backrest assem-
bly is securely locked into the base, and the speaker
cords are fully connected. Repeat any assembly steps
as necessary.
I
J
L
K
This page is intentionally blank.
To Next Page
Loading...
