r
s
.
To assemble the rear wheels to the axle, remove clevis pin G and one washer H from axle, leaving one washer and rear hub J on the axle.
With the spokes facing out, slide a wheel I onto the axle. Slide on a second washer H. Insert straight side of clevis pin through hole in axle. Snap hub cap F onto wheel.
Pull on wheel to make sure it is locked securely. Repeat steps to attach other rear wheel.
Slide the front wheel assembly N onto the front frame leg O until it
locks into place with an audible click. Pull upward on the front wheel
assembly to make sure it is locked securely. Turn the stroller right
side up onto its wheels.
To Next Page
Loading...
