Evenflo ExerSaucer Bouncing Barnyard - Seat Ring and Wheel Assembly; Tray and Spring Dome Assembly

2
!SSEMBLINGTHE%XER3AUCER
2. Place seat ring D upside down and locate the wheel
holders E. Snap six (6) seat wheels F into wheel
holders, as shown.
D
B
F
E
3. Turn seat ring right side up.
Align triangle G on the back of the seat ring with the
triangle H on the seat pad label.
Snap the plastic tabs I on the pad over the pegs J
on the seat ring.
Continue this process until all tabs are attached to
all pegs, then push the seat pad down inside the seat
ring.
I
J
H
G
D
K
L
4. Press assembled seat ring K down firmly onto the top
of the tray L until it snaps into place and spins freely.