4
ASSEMBLING YOUR STROLLER
3
4
5
Push rear wheel post
F
into opening on rear axle
G
. Make
sure wheel locks into position with an audible click. Pull on
wheel to make sure it is locked securely. Repeat on other
side.
DO NOT inflate tires above the maximum recommended
inflation pressure listed on the side of the tire. Over inflation
may cause wheel and/or tire to blowout and could result in
serious injury. Use manual bicycle pump to inflate tires.
To remove rear wheel, turn stroller upside down. Push on
release button
H
while pulling on wheel. Repeat on other
side.
To attach child’s tray, push posts
I
into openings
J
on
stroller. Make sure tray locks into position with an audible
click.
To remove the tray, push buttons
H
under tray while pulling on tray.
F
H
I
H
G
J
To Next Page
Loading...
