Evenflo PIVOT User Manual

11
1
2
CLICK!
CLICK!
Turn the stroller so the front of
the stroller is facing upwards as
shown.
To attach front wheels, push
wheel onto front leg tube until
it clicks into place. Repeat on
other side. Pull on wheels to
make sure both of them are
securely attached.
To attach basket, locate the
basket assembly bar and ensure
the push buttons are on the
bottom. Push buttons in, then
push basket assembly bar onto
frame until it clicks into place on
both sides with an audible click.
Once installed, pull on the
basket assembly bar to make
sure it is locked into place.
Complete assembly by zipping
basket fabric around basket
assembly bar.
1
2
Turn the stroller upside down as
shown so the rear of the stroller
is facing upwards.
To attach rear wheels, push
wheel onto rear leg tube until
it clicks into place. Repeat on
other side. Pull on wheels to
make sure both of them are
securely attached.
CLICK!
ENGLISH
Assembling Your Stroller - Wheels
Assembling Your Stroller - Basket

Evenflo PIVOT Specifications

General

Type	Travel System
Weight Capacity	50 lbs
Stroller Weight	20 lbs
Reversible Seat	Yes
Fold Type	Compact Fold
Harness	5-point
Number of Wheels	4
Seat Recline Positions	Multiple
Car Seat Compatibility	Evenflo SafeMax Infant Car Seat
Included Components	Stroller