Evenflo PIVOT - Using Stroller with Infant Car Seats on Frame

21
• Only use Evenflo SafeMax™ or any version of the LiteMax™
infant car seats with this stroller. Other infant car seats or
carriers are not designed to fit the stroller frame and if used with
this stroller may result in serious injury to your child.
• Before using the infant car seat with this stroller, read all the
instructions provided with it and keep the instructions stored
properly for future use.
• DO NOT lift stroller by using the infant car seat handle when
installed on stroller.
• If unable to securely attach your infant car seat to this stroller,
remove the car seat and contact Evenflo ParentLink at
1-800-233-5921 (USA), 1-937-773-3971 (Canada),
or 800-706-1200 (México).
• To avoid serious injury, make sure the infant car seat is securely
snapped onto the car seat mounts.
• Some Evenflo SafeMax™ and LiteMax™ infant car seats
have a blanket/boot option that must be removed for proper
attachment to this stroller.
To remove the toddler seat,
press the release buttons down
on both sides of the toddler seat
and lift seat off stroller frame.
1
To attach car seat, insert car
seat into the mounts until they
both click into place on both
sides of the frame.
2
WARNING!
DEATH or SERIOUS
INJURY can occur.
Using your Stroller with the Recommended
Infant Car Seats on Your Stroller Frame
ENGLISH
CLICK!