EasyManua.ls Logo

Evenflo PreciseRead - Cleaning and Disinfecting; Error Codes

Evenflo PreciseRead
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Cleaning and Disinfecting
Error Codes
For home use device disinfection, 75% alcohol (available in the
pharmacy) can be used.
Measurement Sensor: Clean the measurement sensor
with an alcohol swab before and after each measurement.
Thermometer: Use a soft, dry cloth to clean thermometer
body. Never use abrasive cleaning agents, thinners or
benzene for cleaning. Do not scratch the surface of the
probe lens or the display. Do not expose the thermometer
to extreme temperatures, humidity, direct sunlight, or shock.
When a malfunction or incorrect temperature measurement
occurs, an error message will appear as described below.
Display Cause Solution
Temperature measured higher
than measurement range.
Body Temperature:
109.4°F (43°C)
Food/Liquid Temperature:
212.0°F (100°C)
Operate the
thermometer only
between the specied
temperature ranges.
If necessary, clean the
sensor tip.
In the event of a
repeated error
message, contact
ParentLink at
1-800-233-5921.
Temperature measured lower
than measurement range.
Body Temperature:
93.2°F (34°C)
Food/Liquid Temperature:
32.0°F (0°C)
The operating temperature is
not in the range:
59°F~104°F (15°C~40°C)
Operate the
thermometer only
between the specied
temperature ranges.