4
Holding the buckle handle A parallel to your body, as
shown, place it in the holder B and slide it downward.
As you slide the handle, it will rotate away from your
body. Keep sliding it downward until it locks into
position with an audible click.
2
Important: Check that the
handle A is locked properly
in position by feeling for the
handle tip C at the bottom of
the holder, as shown.
If you can’t feel the tip, push the
handle downward until you do.
A
A
B
A
C
A
Using the Side-entry Buckle
1
To fasten the side-entry buckle
To Next Page
Loading...
