Event Lighting TDM400RGB - User Manual

1
TDM and DM Laser
USER MANUAL
For safety, please read this user manual carefully before initial use.
Event Lighting reserves the right to revise the manual at any time. Information and specifications within this
manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any
errors or omissions. Please consult Event Lighting for any clarification or information regarding this item.
www.event-lighting.com.au
V1.0

Summary

TDM and DM Laser

Safety Instructions

General Safety Warnings

Key safety precautions including electrical shock, heat, and proper usage to prevent injury.

Power Input Requirements

Details the auto-switching power supply voltage and frequency range for the device.

Product Installation

Mounting and Orientation Guidelines

Instructions for secure mounting, orientation, and use of safety chains for overhead installation.

Control Board Operation

Mode Selection and DMX Addressing

Guide to selecting operating modes (Auto, Sound, DMX, Slave, Test) and setting DMX addresses.

DMX Channels Description

DMX Control Parameters

Detailed breakdown of DMX channel functions, ranges, and effects for various models.

IR Remote Control

Remote Control Functions

Overview of the IR remote control buttons and their corresponding functions like Power, Auto, and Sound modes.

Warranty Information

Laser Emission Data

General Laser Classification and Specifications

Classification, beam diameter, divergence, mode, and cooling details as per IEC standards.

Model-Specific Laser Power

Laser medium, wavelength, and power output for different product models.

Specifications

General Device Specifications

Mains input, total power, safety standard, operating temperature, and dimensions.

Model Net Weights

Net weight for each specific laser model including DM450B, DM400RGB, and TDM400RGB.

Event Lighting TDM400RGB Specifications

General

Brand	Event Lighting
Model	TDM400RGB
Category	Lighting Equipment
Language	English