Quick Start Guide
Look for packet in this ‘BASE KIT’ box labeled “Modular
Configuration Guide”, find your layout in the packet, and
make sure you received the correct number of boxes and
contents to build your specific layout.
1. First, find the “Assembly and Installation” instructions
for building your ‘BASE KIT’ in this base kit box.
a) Measure your space to make sure the complete
closet design will fit.
b) Be sure to install the ‘Base Kit’ at the furthest left
side of your closet space.
c) Note: At this time, only install the hang track and
vertical rails. Save the brackets, shelves, closet
rods and decorative covers for later installation
steps.
2. Next, install the hang track and vertical rails from the
‘Extension’ box(s) if your layout includes extensions.
Save the brackets, shelves, closet rods and decorative
covers for later installation steps.
3. Now install the brackets, shelves, and closet rods from
the base kit and extension boxes, at the desired
locations.
4. Next, install components from the ‘Add-On’ box(s) if
your layout includes add-ons.
5. Last, finish the closet by installing the decorative hang
track covers, vertical rail covers, and shelf covers.
To Next Page
Loading...
