To Next PageTo Next Page
Need help?Do you have a question about the Everbilt A2422 and is the answer not in the manual?
Emphasizes careful reading of instructions to prevent product damage or human injury.
Notes information compiled at publication time and company's right to change products without notice.
Advises against using corrosive cleaners or solvents that damage tank accessories, causing leakage.
Stipulates using only company-provided parts for installation to avoid damage.
Specifies the safe operating water temperature range from 2°C to 45°C.
Specifies the safe operating pressure range from 0.02MPa to 0.8MPa.
Instructs users to refer to the actual product if it differs from the documentation.
States the device is not intended as a retrofit for 4.8 Lpf (1.28gpf) water closets.
Warns that performance may vary as the product was not tested on all water closet models.
Guides on adjusting half and full flush volumes using float and adjustor components.
Details on preparing the push button, including rod length measurement and cutting.
Step-by-step guide for replacing the silicone seal on the flush valve.
Provides solutions for common flush valve issues like leaks and improper flushing.
Lists and illustrates the service parts with their respective quantities.
Emphasizes careful reading of instructions to prevent product damage or human injury.
Notes information compiled at publication time and company's right to change products without notice.
Advises against using corrosive cleaners or solvents that damage tank accessories, causing leakage.
Stipulates using only company-provided parts for installation to avoid damage.
Specifies the safe operating water temperature range from 2°C to 45°C.
Specifies the safe operating pressure range from 0.02MPa to 0.8MPa.
Instructs users to refer to the actual product if it differs from the documentation.
States the device is not intended as a retrofit for 4.8 Lpf (1.28gpf) water closets.
Warns that performance may vary as the product was not tested on all water closet models.
Guides on adjusting half and full flush volumes using float and adjustor components.
Details on preparing the push button, including rod length measurement and cutting.
Step-by-step guide for replacing the silicone seal on the flush valve.
Provides solutions for common flush valve issues like leaks and improper flushing.
Lists and illustrates the service parts with their respective quantities.
General| Brand | Everbilt |
|---|---|
| Model | A2422 |
| Category | Control Unit |
| Language | English |
