14
Parameter settings:
Long press the MENU button for 3 seconds to enter the parameter setting; short press
the MENU button to switch P01-P06, press the up and down keys to increase or
decrease the parameter value; return to the riding mode after no button for 5-8 sec-
onds.
1 .P01:Set the speed unit, you can choose km/h and miles; the default is km/h；
2.P05: Set the cruise switch: 1 is to open the constant speed cruise function, 0 is to
close; the cruise start time is 6-8 seconds;
3. P06: Set zero start and non-zero start, 0 is zero start, 1 is non-zero start; the default
is 0, zero start;
4. P99:To restore the factory settings, press and hold the "+" button for 3-5 seconds in
this mode, wait for 99 to become --, that is, restore the factory settings successfully,
and automatically return to the riding interface;
5.0d0: The total mileage is cleared. In this mode, press and hold the "+" button for 3-5
seconds, the total mileage will be reset to 0, and it will automatically return to the riding
interface.
To Next Page
Loading...
