42
Apply To: This button can be used to copy the video loss settings to other cameras. Select which cameras
you wish to copy to. "Select All" selects all cameras, “Unselect All” deselects all cameras. Click “OK” to
copy the settings or "Cancel" to exit without copying.
4.4 RECORD & PLAY SETTING
Figure 4-7 is a screen shot of the RECORD & PLAY SETTING MENU. This menu is used to configure
basic recording and playback settings.
Figure 4-7 Record & Play Menu
4.4.1 Record
Record Overwrite: Check the box and disk will begin overwriting when full. NOTE: Unless this box is
checked, the DVR MUST STOP RECORDING WHEN THE DISK IS FULL. The use of record overwrite is
To Next Page
Loading...
