Need help?Do you have a question about the EverFocus eZ.HD ECOR HD 16X1 and is the answer not in the manual?
General| Video Input | 16 channels |
|---|---|
| Video Output | HDMI, VGA |
| Recording Resolution | 1080p, 720p, 960H |
| Hard Drive Support | 2 SATA HDDs |
| Compression Format | H.264 |
| Power Supply | DC 12V |
| Operating System | Embedded Linux |
| Network Interface | RJ45 |
Provides step-by-step instructions for installing 3.5-inch HDDs inside the DVR for recording.
Guides users on how to find and manage the DVR's IP address using the IP Utility program.
Explains three methods for connecting the DVR to a network: Router/LAN, Direct High-Speed, and One-to-One.
Details how to operate the DVR using a USB mouse, covering channel selection and OSD menu.
Explains how to operate the DVR using the front panel buttons, including menu navigation.
Guides on using search menus like Time Search, Event Search, etc., for playback.
Covers global express settings for all cameras, including date, time, and recording modes.
Allows configuration of individual camera settings like basic, adjust, and eZ Hopper.
Configures basic recording settings on the hard disk, like overwrite and timestamp.
Allows configuration of Alarm, Video Loss, Motion, and Other event settings.
Covers network configuration for remote viewing and management.
Sets up the recording schedule by time, event types, or FPS.
Configures general DVR settings like date, time, user privileges, and firmware.
Step-by-step guide to access the DVR remotely via a web browser.
Details how to view live camera streams remotely through the web interface.
Checklists for resolving common problems like no recording, no display, or network connectivity issues.
To Next Page
