Need help?Do you have a question about the EverFocus EDSR-900 and is the answer not in the manual?
General| Model | EDSR-900 |
|---|---|
| Type | Digital Video Recorder |
| Video Output | BNC, VGA |
| Video Compression | H.264 |
| Storage | Internal HDD |
| Hard Drive Capacity | Up to 2TB |
| Audio Output | 1 channel |
| Operating System | Embedded Linux |
| Network Interface | Ethernet (RJ-45) |
| Power Supply | DC 12V |
| Playback Features | Simultaneous playback, search by event |
| Mobile Support | Yes (via app) |
Covers essential safety rules for installation, operation, and maintenance to prevent hazards.
Details risks associated with electrical shock, moisture, and environmental conditions for safe operation.
Instructions for careful unpacking and professional installation to ensure safe operation.
Key operational instructions, warnings, and guidelines for device handling and protection.
Lists key features of the EDSR-900/1600 Duplex Digital Video Recorder.
Details video format, input/output, compression, storage, and other technical data.
Identifies and describes connectors and ports on the rear panel of the DVR.
Illustrates how to connect the DVR within a surveillance system.
Details the functions of buttons and controls on the front panel of the DVR.
Provides step-by-step instructions for initial setup and basic operation of the DVR.
Set the device's date, time, and recording timer schedules.
Configure alarm and motion detection triggers for recording events.
Configure network connectivity and system-wide settings.
Define matrix monitor sequences and manage communication protocols.
Start continuous recording using the 'Normal Record' setting.
Configure automatic recording triggered by alarm events.
Play back stored video and audio from the last segment.
Search and play back recorded video by segment, alarm, or date/time.
Copy still images and movie files to a Compact Flash card.
Export the event log to a text file (*.txt) on the Compact Flash card.
Describes the features and controls of the main display monitor.
Explains how to configure and use the call and matrix monitor outputs.
Details the RS-485 protocol, keyboards, and wiring for remote operation.
Describes the functions and operation of the optional IR remote controller.
Guide to accessing the DVR remotely via the internet or intranet.
Explains the layout and icons of the remote viewing interface.
Details playback methods and screen views in remote access.
Provides technical details on the DVR's LAN interface and network capabilities.
Presents tables showing recording time based on HDD size, speed, and quality.
Details RS-232 pin assignments, transmission settings, and control protocols.
Details the pin assignment for alarm inputs and outputs on the DVR.
To Next Page
