How to troubleshoot an Everglades Refrigerator that is not working?
If your Everglades Refrigerator isn't working correctly, start by ensuring the power cord is properly plugged into the outlet. Next, inspect the fuse or circuit of your power supply and replace it if necessary. If the ambient temperature is too low, try adjusting the chamber temperature to a colder setting.
Why is the temperature inside my Everglades Refrigerator too warm?
If the temperature inside your Everglades Refrigerator is too warm, it might be because the doors were left open too long or too frequently. Also, check if something is obstructing the doors from closing properly, or whether the appliance has insufficient clearance at the sides, back, and top.
Why does the motor run continuously on my Everglades EVUD428?
It's normal to frequently hear the motor of your Everglades Refrigerator, especially when the temperature setting is colder than necessary, a large amount of warm food has recently been stored, the outside temperature is high, the doors are opened too often or for extended periods, or just after installation or after the refrigerator has been off for a while.
What to do if my Everglades EVUD428 drips water on the floor?
If water is dripping on the floor from your Everglades Refrigerator, the water pan at the rear bottom might not be leveled properly. Another cause could be that the draining spout isn't directing water into the pan correctly, or the spout is blocked. You might need to move the refrigerator to check the pan and spout.
Why is my Everglades EVUD428 making noise?
General| Brand | Everglades |
|---|---|
| Model | EVUD428 |
| Category | Refrigerator |
| Language | English |
To Next Page
