Everhard Industries EXCELLENCE 35L

To Next Page

**PRODUCT SHOULD BE INSTALLED BY A LICENSED PLUMBER**

INSTALLING YOUR LAUNDRY UNIT

1. Carefully lift product out of the carton.

2. The laundry unit must be installed at the location of the drain (refer to Connecting the Laundry Sink to the Drain

section). Check the dimensions of the area where the laundry unit will be installed to ensure it will ﬁt within the

allocated space.

3. Ensure the back wall of the area where the laundry unit will be installed is straight and level.

4. Carefully remove the laundry sink from the unit using protective gloves and set aside.

5. Install the basket waste onto the sink. The basket waste is a two part waste, therefore the screw within the middle of

the waste needs to be removed before installing the waste onto the sink. Insert the top part of the waste including

the thin black rubber seal into the waste hole of the sink. From underneath install the bottom part of the basket

waste including the thick black rubber onto the waste hole. Screw the stainless steel threaded screw through the

top part of the basket waste into the bottom part of the basket waste and tighten using a screwdriver.

EXCELLENCE 35L & 45L DRAWER SYSTEM LAUNDRY UNIT

INSTALLATION & CARE INSTRUCTIONS

Drainage

Solutions

Interior

Products

everhard.com.au | 131 926

Environmental

Civil &

Commercial

35L | EI code: 71E3510

45L | EI code: 71E4510

350

180

555

510

871

513

560

886

180

350

180

390

568

871

395

570

886

180

362

90 175

886

180

361

90 175

886

871

568

570

390

395

510

513

560

555

Main Page

Need help?

Do you have a question about the Everhard Industries EXCELLENCE 35L and is the answer not in the manual?

Summary

Washing Machine Drainage Hose Connection

Concealed Connection

Details on how to connect the washing machine drainage hose using a concealed method.

Connecting the Laundry Sink to the Drain

Adjustable Feet Installation (Optional)

Positioning of Hot and Cold Water Plumbing Connections

Caring for Stainless Steel

Do: Routine Cleaning

Regular cleaning using bicarb soda or stainless steel cleaner to maintain appearance.

Do: Rinse After Use

Thoroughly rinse with clean water to remove chemicals, iron deposits, or acids.

Do: Dry Surface

Wipe dry with a cloth after each use to keep the stainless steel fresh and spot-free.

Dont: Acids and Cleaners

Avoid citric acid or chloride-containing chemicals that can mark or rust the surface.

Dont: Fumes

Do not store chlorine, bleach, or acid-based products underneath to prevent rust.

Dont: Soaking

Avoid leaving damp sponges or cloths to prevent pitting of the surface over time.

This document provides comprehensive installation and care instructions for the Everhard Excellence 35L & 45L Drawer System Laundry Unit, a versatile and robust solution for modern laundry spaces. The unit is designed to integrate a laundry sink with a drawer system, offering both functionality and aesthetic appeal.

Function Description:

The Everhard Excellence Laundry Unit serves as a combined laundry sink and storage system. It is primarily used for washing, soaking, and general laundry tasks, while the integrated drawers provide convenient storage for laundry essentials, detergents, and other household items. The unit is available in two main capacities: 35L and 45L, catering to different space requirements and usage needs. It is designed for connection to both hot and cold water plumbing, as well as a washing machine drainage hose, making it a central hub for laundry activities. The system also supports optional adjustable feet for customized height settings.

Important Technical Specifications:

Models:
- 35L Laundry Unit: Everhard code 71E3510.
  - Dimensions (Cabinet): Approximately 390mm (width) x 570mm (depth) x 871mm (height) / 886mm (height with sink).
  - Plumbing connections: Ideal location for hot and cold plumbing connections is approximately 220.2mm from the back wall and 605.9mm from the bottom of the unit, with a recommended height of 695.6mm from the floor.
- 45L Laundry Unit: Everhard code 71E4510.
  - Dimensions (Cabinet): Approximately 510mm (width) x 555mm (depth) x 871mm (height) / 886mm (height with sink).
  - Plumbing connections: Ideal location for hot and cold plumbing connections is approximately 220.2mm from the back wall and 605.9mm from the bottom of the unit, with a recommended height of 695.6mm from the floor.
Material: Stainless Steel for the sink component.
Drainage: Designed for a basket waste system. Includes provisions for a washing machine drainage hose connection (25mm side connection). Requires a 50mm DWV pipe and an approved 50mm PVC Trap for connection to the existing drainage pipe.
Installation: Requires fastening to the wall using two screws or wall anchors (M6) into the top bracket (approx. 300mm centres).
Adjustable Feet (Optional): Everhard Adjustable Feet (97943) can be installed for height customization.

Usage Features:

Integrated Storage: Features a drawer system beneath the sink, providing organized storage. The drawers are designed for easy removal and re-insertion, facilitating maintenance and installation.
Washing Machine Integration: Includes a dedicated hole for concealing washing machine taps and a connection point for the washing machine drainage hose, allowing for a neat and integrated laundry setup.
Concealed Connections: The design allows for concealed plumbing and drainage connections, contributing to a cleaner and more modern aesthetic.
Tapware Compatibility: Designed to accommodate various tapware options, which are installed directly onto the sink.
Level Installation: Emphasizes the importance of level installation for optimal performance and appearance.
User-Friendly Drawer System: Drawers are equipped with levers for easy disengagement and re-engagement, simplifying access and maintenance.

Maintenance Features:

Stainless Steel Care:
- Routine Cleaning: Recommended to clean the stainless steel bowl or sink regularly using bicarb soda or a stainless steel cleaner to maintain its appearance.
- Rinsing: Thorough rinsing with clean water after each use is crucial to remove chemicals, iron deposits, or acids that can cause damage.
- Drying: Wiping the stainless steel bowl or sink dry with a soft cloth after every use helps prevent water spots and keep the surface fresh.
- Avoid Acids + Cleaners: Fruit juices (citric acid) and cleaning chemicals containing chloride can mark or cause surface rust if left to dry. Prompt removal with clean water and drying are essential.
- Avoid Fumes: Storing chemicals like chlorine, bleach, or acid-based products underneath the sink can cause rapid rusting due to corrosive fumes. These products should be stored elsewhere.
- Avoid Soaking: Leaving damp sponges or cloths in the bowl or around the sink edge can lead to pitting of the surface over time if not cleaned properly.
Drawer Maintenance: The drawers can be easily removed for cleaning or to access plumbing components underneath the sink.
Leak Testing: After installation, thorough testing for leaks is recommended to ensure proper sealing and prevent water damage.
Professional Plumbing: The manual explicitly states that the product should be installed by a licensed plumber, ensuring correct and safe plumbing connections and adherence to local regulations. This also contributes to long-term reliability and minimizes potential maintenance issues arising from improper installation.