10
ENGLISH
FAHRENHEIT °F Icon
► Remains on when displaying a temperature mea-
sured in Fahrenheit degrees
CELSIUS
°C Icon
► Remains on when displaying a temperature mea-
sured in Celsius degrees
MINUTES
min Icon
► Remains on when displaying a time lapse ex-
pressed in minutes (e.g. the duration of a chilling /
freezing cycle)
OFF Icon
► Remains on when the device is connected and
is OFF.
9.2 INSTRUCTION FOR USE
9.2.1 Start-up
Before starting up the blast chiller, please make sure that the power wiring and the connection have
been performed as per dispositions in chapter 15.
When the control board is fed, a two-seconds lamp test is carried out.
There are 3 statuses of functioning:
OFF status:
► the blast chiller is being fed and is off
The display only shows the
icon, coloured
in red.
ON/STAND-BY status:
► the blast chiller is being fed, is on and waiting
for a working cycle to be carried out.
The display shows the room’s temperature
RUN status:
► the blast chiller is being fed, is on, and a
working cycle is being carried out.
The display shows the following information:
► if a chilling or freezing cycle with core probe
is being carried out, the display shows the
temperature detected by the probe
► if a chilling cycle or a time-based freezing is being
carried out, the display shows the time remaining
before the end of the current cycle
► if a storage cycle is being carried out, the display
shows the room’s temperature
To Next Page
Loading...
