EQX Unpacking Instructions
Revision 1.0 EQX - 3
7. Once all the clips are removed from the top cap, ensure at least two people are securing the side
panels while another person carefully lifts and removes the top cap.
8. Ensure at least two people are safely securing the side, front and back panels before removing the
bottom clips. Remove the 2, 3 or 4 clips that are securing the front panel to the pallet. Carefully lift
and remove the panel. Set the panel aside. Repeat this procedure for the remaining panels.
It is important to retain the shipping container, shipping container materials and
accessories for future shipping use.
9. Once all the panels are removed, set them aside. Remove the foam cap ends from the top and
bottom of the EQX.
10. Remove the protective packaging bag that is covering the EQX.
11. Open the EQX door and remove the protective packaging bag(s) from inside the unit.
12. Remove the bolts from the side and bottom ears of the triangle rack mount. The accessory box
that was shipped with your EQX contains the two wrenches needed to loosen the bolts. Use the
7/16” size wrench to remove the side bolts, and the 9/16” size wrench to remove the bottom bolts.
13. Once the bolts are removed, the EQX can be moved from the pallet and installed in the desired
location. Please refer to the EQX user manual for installation and operation instructions.
To Previous Page
Loading...
