Everybot Edge Quick Guide

EDGE
QUICK GUIDE
Ver 1.0 Copyright © 2019 Everybot Inc. All rights reserved
Main Unit
Remote Control:
with Battery
Power Adaptor Silicon Brush
Water Supply Mop Kit Mother Yarn Mops: Grey Microfiber Mops: Green
Mother yarn mop (grey color)
It is included with mother yarn which is 100 times
thicker than microfiber. Thus, it is good for cleaning
up dust in cracks and stains.
Microfiber yarn mop (green color)
It is a mop with richer and longer yarns so it has
superior wiping performance.
Note
This is Not a Malfunction. Please Check.
Maintaining Water Supply Mop Kits
LED lamp is OFF
Sound alarm while its operation.
Components
LED ON
Blue Blinks
LED OFF
If you press a operation button for
2sec. LED lamp will be turned on with
power on status.
Aer 50minute cleaning, the main unit
sounds the alarm to change mops and
fill water in the water supply mop kit.
For the better cleaning, replace with
new mops and fill water aer charging.
If the machine does not work for 5min.
It automatically power o together with
LED lamp.
www.everybotweb.com
1
Separate the mop from the water tank
mop kit aer finished operating.
Please just pull out the water tank mop
kit by hands.
If it is hard to pull out, please twist it
a little bit.
2
Open the rubber cap to dry out inside
of water tank aer pour remained
water.
Please carefully review this guide before using the product
·
·
·
·
·
·
·
·

Everybot Edge Specifications

General

Brand	Everybot
Model	Edge
Category	Vacuum Cleaner
Language	English