Need help?Do you have a question about the EVGA BR Series and is the answer not in the manual?
General| Efficiency | 80 PLUS Bronze |
|---|---|
| Modular | Non-Modular |
| Fan Size | 120mm |
| Warranty | 3 years |
| Connectors | 1 x 24 Pin ATX, 2 x 6+2 Pin PCI-E, 6 x SATA, 3 x Peripheral |
| Input Voltage | 100-240 VAC |
| Protection | Over Voltage, Under Voltage, Over Power, Short Circuit, Over Current, Over Temperature |
| Wattage | 500W, 600W, 700W |
Unit has no user-serviceable parts; opening casing risks electrocution and voids warranty.
Provides ultra-stable voltage and clean power output for reliable component operation and overclocking.
Equipped with comprehensive protection set (OVP, UVP, OPP, SCP, OTP, OCP) and a 3-year warranty.
Install PSU into case using screws; consider fan orientation for efficiency.
Connect 20+4-pin ATX and 4+4-pin EPS12V cables to the motherboard.
Connect 6/6+2-pin PCI-E cables to graphics card(s), minding pin configuration.
Connect SATA power cables to drives and Molex connectors to other devices/adapters.
Connect AC power cord, verify connections, and switch PSU to ON position.
Lists connectors (MB, CPU, VGA, SATA, PERIF/FDD) and quantities for 450/500/600 BR models.
Lists connectors (MB, CPU, VGA, SATA, PERIF/FDD) and quantities for the 700 BR model.
Details AC input and DC output specifications (voltage, current, wattage) for the 450W model.
Details AC input and DC output specifications (voltage, current, wattage) for the 500W model.
Details AC input and DC output specifications (voltage, current, wattage) for the 600W model.
Details AC input and DC output specifications (voltage, current, wattage) for the 700W model.
To Next Page
