Do you have a question about the EVGA SuperNOVA 1600P2 and is the answer not in the manual?
Model | SuperNOVA 1600P2 |
---|---|
Wattage | 1600W |
Efficiency Rating | 80 PLUS Platinum |
Efficiency | Up to 94% |
Modularity | Fully Modular |
Form Factor | ATX |
Fan Type | 140mm Double Ball Bearing |
Warranty | 10 years |
Operating Temperature | 0°C to 50°C |
Input Voltage | 100-240VAC |
MTBF | 100, 000 hours |
Cooling | Fan |
Dimensions | 150mm x 86mm x 200mm |
Input Frequency | 47-63Hz |
Protection | OVP, UVP, OCP, OPP, SCP, OTP |
Output | +12V@133.3A |
PCI-Express Connectors | 6+2-pin |
EPS Connectors | 2 x 8 Pin |
SATA Connectors | 16 |
Outstanding electrical performance with ultra stable voltage and extremely clean power output.
Provides silent operation at low loads, improved efficiency, and longer fan life with ECO Intelligent Thermal Control.
Comprehensive protection set including OVP, UVP, OPP, SCP, OCP, OTP, with a 10-year warranty.
Built to high standards with 100% Japanese capacitors and quality components for performance and reliability.
Reduces clutter, improves airflow, and offers clean cable management for better system aesthetics.
Steps for physically installing the power supply unit into the computer case, including fan orientation.
Detailed steps for connecting various cables (ATX, EPS12V, PCI-E, SATA, Molex) to the motherboard and components.
Clarification on the number of mounting holes and provided screws for PSU installation.
Guidance on connecting EPS cables for motherboards, including dual CPU and overclocking scenarios.
Explanation of the ECO Thermal Control System and its fan operation during low to moderate loads.
Recommendation to use direct power connections from the PSU for optimal power distribution.
Guidance on correctly connecting PSU cables, noting differences between PSU and motherboard sides.
Steps to diagnose and resolve system POST or boot loop issues after PSU installation.
Information on how to contact EVGA for support, including phone and email.