Need help?Do you have a question about the EVGA SUPERNOVA P6 Series and is the answer not in the manual?
General| Series | SUPERNOVA P6 |
|---|---|
| Form Factor | ATX |
| Input Voltage | 100 - 240 VAC |
| MTBF | 100, 000 Hours |
| Efficiency Rating | 80 Plus Platinum |
| Power Good Signal | 100-500ms |
| Hold-up Time | ≥16ms |
| Efficiency | ≥92% at 50% load |
| Operating Temperature | 0°C to 50°C |
| Cooling Fan | 135mm Fluid Dynamic Bearing |
| Fan Control | ECO Mode |
| Protections | OVP, UVP, OPP, SCP, OCP, OTP |
| Connectors | 1x 24-pin ATX, 2x 4+4-pin EPS, 6x 6+2-pin PCIe, 4x Peripheral |
| Warranty | 10 Years |
| Type | ATX12V |
| Wattage | 850W / 1000W |
| Modularity | Fully Modular |
Highlights ultra-stable voltage, clean power output, high efficiency up to 94%, and 80 PLUS PLATINUM certification.
Features a 'No Fan Spin' mode for silent operation at low loads, saving energy and extending fan life.
Lists protections like OVP, UVP, OPP, SCP, OCP, OTP, and mentions a 10-year warranty.
Emphasizes 100% Japanese capacitors, quality components, and an ultra-quiet 135mm fluid dynamic bearing fan.
Allows users to disconnect cables, improving airflow, reducing clutter, and enhancing case aesthetics.
Explains that extra screw holes provide compatibility, and only four are needed for mounting.
Details when to connect one or two EPS cables for motherboards, especially for dual CPU or extreme overclocking.
Further explanation of the ECO mode fan behavior for silent operation and efficiency.
EVGA recommends direct power connections from the PSU for graphics cards, motherboards, and peripherals.
Guidance on connecting cables to the correct ends of the PSU and components, matching labels.
Provides contact information (phone, email) for EVGA technical support in the USA and Europe.
To Next Page