Gaming Case User Guide
Parts Descriptions
The following accessories are included with the DG-7 Series Chassis :
• EVGA DG-7 series Chassis
The EVGA DG-7 series Mid-Tower chassis.
27pcs #6-32 5L
Fastenersfor holdingMothaboad to standoffs,
and 3.5 HDD.
• 28pcs KB5x IOL
Self tapping screws for fans.
• Colored decal set
Colored decals for the EVGA logo on the
front panel of DG-7.
• 13pcs Standoff 6-32 female end
Standoff screws for the motherboard. Use
with #6-32 5L screws to fasten the motherboard
to the DG-7.
• 16pcs M3 L4
Fasteners for SSD's.
o Manual
Installation and setup information you are
currently reading.
Manual
• Textured Thumbscrews
Thumb screws that hold the case panels on.
Center has an AIGA logo but can be covered
with included stickers to change the look
of the screw.
4
To Next Page
Loading...
