EVGA’s UV Plus+ gives you the ability to use multiple displays by utilizing a
USB 2.0 port on your laptop or PC. Each monitor will need either a UV 12 or
UV 16 and up to 6 UV Plus+ devices can be used at the same time allowing
multiple displays through CRT and LCD monitors, or a Projector. With the
ability to Mirror or Extend your desktop up, down, left, or right, EVGA’s UV
Plus+ gives you full freedom to move about your virtual work space.
• USB 1.1 is supported (USB 2.0 is recommended)
• Windows
®
2000 SP4, XP SP2 32-Bit, or Vista 32-Bit
• CD-ROM or DVD-ROM if using the provided installation CD
• 30 MB of free disk space
• 1.2 GHz or higher processor
• 512 MB of system memory (1 GB or more is recommended)
Introduction
Package Contents:
Your EVGA UV Plus+ device will have the following
optional items included in this package:
1 x This Printed Install Quick Guide
1 x DVI to VGA Adapter
1 x USB Cable
1 x Installation CD for Drivers and Software
1 x Carrying Case
System Requirements:
UVPlus+ Supports:
Windows Vista Aero
32-Bit Color Depth
Widescreen Aspect Ratio
Ability to Clone or Extend
VGA, DVI, and FPI Display Connections
High-Defi nition Displays
The Following Resolutions
are Supported:
Resolutions may vary depending on your displays capabilities.
• 800x600, 1024x768, 1152x864, 1280x720, 1280x1024, 1440x900,1400x1050
Supported on both UV 12 & 16
• 1600x1200, 1680x1050
Supported by UV 16 model only
UV 12
UV 16
To Next Page
Loading...
