Hardee by EVH
Assembly and Installation
DB4048 & DB4060 HYDRAULIC ROTARY CUTTE
10 4/3/09
Hydraulic System and Operational Setup,
continued…
If you have any questions, consult your local Hardee
dealer.
Working Safely with Hydraulic Lines
Purge all air from hydraulic system before attempting
to raise or lower the cutter deck, and extending or
retracting the extension arm.
DANGER
Stand clear if lowering or raising deck, hydraulic deck
can fall suddenly from system failure.
DANGER
Do not use your hand or skin to check for hydraulic
leaks, use cardboard or wood. High-pressure oil leaks
can penetrate skin causing injury and gangrene.
Consult a doctor immediately.
To Next Page
Loading...