Hardee by EVH
Introduction
DB4048 & DB4060 HYDRAULIC ROTARY CUTTER 1 4/3/09
To Our Customers
We at Hardee by EVH Manufacturing Company thank
you for buying your new Hydraulic Rotary Cutter.
We have labored hard to build a cutter to do the work
you have in mind. Many hours of engineering, field-
testing and improvement have gone into the design
and fabrication of your cutter. We will strive to
continue this quality of manufacturing in the future,
always keeping the customer’s needs clearly in mind.
The best performance of your cutter will depend on
you. Proper lubrication, maintenance, hookup,
adjustments and operation are essential for it to give
you long and dependable service. However, as with
any type of equipment, your cutter is designed to
perform specific functions.
In this manual, you will find instructions on cutter
features, maintenance and operation. If customer
service or repair parts are required, contact your local
Hardee dealer. PLEASE SPECIFY MODEL AND
SERIAL NUMBER WHEN ORDERING PARTS.
Owner’s Responsibility
The manufacturer has no control over the ultimate use
of the cutter and therefore assumes no responsibility
or liability for damage or injury resulting from the use
of this machine.
The upkeep of the hydraulic cutter is the responsibility
of the user. This upkeep includes all shielding, guards,
and safety decals (OSHA Regulation 1928.57). You
can obtain replacement parts from any authorized
Hardee dealer.
Read this Operator's Manual before operating the
cutter. Failure to do so could result in injury to the
operator or to others. Remember that most accidents
occur due to neglect or carelessness. The operator is
responsible for inspecting and making repairs as may
be necessary. Cleaning after each use and storage
under a shelter will extend the life of the cutter.
Purpose of This Manual
This manual provides information on safety, operation,
adjustments, troubleshooting and maintenance of your
new cutter. Please read and follow all the
recommendations to help ensure that you get many
years of service from your new Hardee cutter.
If you need additional copies of this manual, please
contact your local Hardee dealer or download a copy
from our website at www.evhmfg.com.
Safety-Alert Symbol
This symbol is the safety alert symbol. It
appears throughout this manual to call your
attention to instructions involving your personal
safety and the safety of others. Failure to follow
these instructions can result in injury or death.
Signal Words
Safety signal words are words that call attention to the
safety sign and designate a degree or level of hazard
seriousness. The signal words used throughout this
manual are DANGER, WARNING and CAUTION.
Please read and follow all safety messages that have
these signal words shown for your protection.
DANGER
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury
Customer Assistance
The Hardee sales team would like you to be satisfied
with your new Long Reach Cutter. If for some reason
you have any questions about the information in this
manual or have a problem with your cutter, please
discuss the problem or question with the management
of your local dealership. If further assistance is
required, please contact:
HARDEE BY
EVH Manufacturing Company, LLC
Sales Department
4895 Red Bluff Road
Loris, SC 29569
843-756-2555
To Next Page
Loading...
Need help?
General
