Evidence Cross-8/HPoE-10G - User Manual

Guides through the initial setup and login process for the switch's web interface.

Describes how to view and configure system name, location, and contact details.

Covers configuring the IPv4 address, subnet mask, gateway, and DNS server settings.

Details advanced IP configuration, including interfaces and static IP routes.

Covers manual and automatic system time setting via NTP, including clock source and system date.

Details LLDP configuration parameters for each port, including timing and TLV fields.

Allows configuration of port details, including alias, speed, flow control, and frame size.

Configures aggregation hash mode and defines static aggregation groups and port members.

Allows inspection and configuration of LACP port settings, including key, role, and timeout.

Configures loop protection parameters, including enabling the function, transmission time, and shutdown time.

Configures UDLD parameters, including mode (disable, normal, aggressive) and message interval.

Configures PoE port settings, including reserved power, PoE mode, schedule, priority, and power limits.

Displays current status for all PoE ports, including PD class, power requested, allocated, used, and port status.

Assigns specific VLANs for management purposes and configures port VLAN membership.

Provides an overview of VLAN membership status for VLAN users, showing port memberships.

Gathers VLAN status information, reporting by combined, Admin, NAS, GVRP, MVR, Voice VLAN, MSTP, DMS, VCL.

Configures MAC address to VLAN ID mappings, allowing addition and deletion of entries.

Allows adding new protocols to Group Name and mapping entries, as well as managing existing entries.

Configures IP subnet-based VLAN entries, allowing addition, updating, and deletion.

Manages Private VLAN membership, allowing addition, deletion, and port member configuration.

Enables or disables port isolation on ports within a Private VLAN to restrict traffic flow.

Configures Voice VLAN for voice traffic, enabling classification and scheduling for QoS.

Configures basic QoS Ingress Classification settings for all switch ports.

Provides an overview of QoS Ingress Port Policers for constraining traffic flows and marking frames.

Provides an overview of QoS Egress Port Shapers for all switch ports, detailing queue and port shaper parameters.

Allows configuration of storm control for unicast, multicast, and broadcast traffic to prevent network instability.

Provides an overview of QoS Egress Port Scheduler for all switch ports, detailing scheduling modes and queue weights.

Configures DSCP values for QoS, including port DSCP settings and translation.

Defines QoS Control Lists (QCLs), composed of QoS Control Entries (QCEs) for traffic classification.

Selects spanning tree protocol enable/disable and chooses the protocol version.

Allows inspection and modification of STP MSTI bridge instance priority configurations, including VLAN mapping.

Provides a status overview of all STP bridge instances, including bridge ID, root ID, and port roles.

Configures MAC address table, including aging settings, learning modes, and static entries.

Deploys access control on IP multicast streams, allowing creation of up to 64 profiles with 128 rules each.

Configures DHCP snooping to prevent unauthorized DHCP servers and block intruder packets.

Configures DHCP relay agent for forwarding DHCP messages between clients and servers across subnets.

Manages user accounts, privilege levels, and authentication methods for switch access.

Defines privilege levels for user accounts, controlling access to various switch functions and groups.

Configures user authentication methods (local, RADIUS, TACACS+) for management client interfaces.

Configures IEEE 802.1X parameters for user authentication, including reauthentication and guest VLANs.

Configures IP Source Guard, enabling or disabling it globally and per port, and setting maximum dynamic clients.

Configures ARP Inspection mode (on/off) and port status (enabled/disabled), including VLAN and log type settings.

Configures port security to restrict input by limiting and identifying MAC addresses, including aging and violation modes.

Configures RADIUS server parameters, including timeout, retransmit, deadtime, and key for authentication and accounting.

Configures up to 5 TACACS+ servers, specifying timeout, deadtime, key, hostname, and port for authentication.

Configures ACL parameters for each switch port, affecting frames unless a specific ACE matches.

Defines Access Control Lists (ACLs) made of ACEs, specifying frame matching criteria and actions.

Configures SNMPv3 settings, including communities, users, groups, views, and accesses.