EN
Mounting the buggy wheels
If the bicycle trailer has the drawbar or the jogger wheel set
insert the fastening hooks back into the holes provided. Make sure that the fastening hooks are closed.
trailer at the front, tilt it backwards and support it on the handlebar. Make sure that the surface
under the trailer is clean and smooth so as not to soil or damage the textile cover. Later, when
you are familiar with the assembly, it is enough to lift the trailer slightly at the front for this
work.
1. lift the trailer at the front or tilt it backwards.
2. insert the buggy wheel into the buggy wheel holder as far as it will go until you hear and feel it
engage.
3. to remove the buggy wheel, press the button and pull the buggy wheel out.
Caution! Make sure that the buggy wheel is correctly engaged and cannot come loose by itself!
If the buggy wheel is not correctly engaged, the buggy wheel can come loose, which can lead
to accidents with injuries.
Caution! Never ride with a mounted buggy wheel when using the trailer as a bicycle trailer! The
buggy wheel could hit obstacles, which could lead to accidents and injuries.
1.
2.
3.
To Next Page
Loading...