EN
Mounting the jogger wheel
If the drawbar or the buggy wheels are mounted on the bicycle t
The jogger set consists of two wheel arms, a jogger wheel and a catch strap. The two wheel outriggers
are mounted in a similar way to the drawbar.
1. Lift the trailer at the front or tilt it backwards.
2. Loose the axle of front jogger wheel a bit, insert the two wheel outriggers. Please be known that
the gear for regulating front wheel should be downwards. Making sure the hook in axle should be
coupled with slots on the outriggers.
3. Insert the wheel arms into the holders.
4. Fix the wheel arms with the clamps. Check the wheel and outriggers are all fixed tightly.
Riding with an incorrectly fastened jogger set can lead to accidents with life-threatening
injuries. If in doubt, contact a specialist workshop!
Tip: If the trailer does not drive exactly straight ahead in the jog
adjusted by turning the adjusting rings on the dropouts.
To Next Page
Loading...