INTRODUCTION
Your new CopyBlastUltimate is a stand-alone CD/DVD/BD Disc Duplicator offering 1, 3, 7 or 11
target drives. The tower supports up to the maximum 40x CD, 24x DVD, 15x Blu-Ray writing
depending upon the attached drives, media and formatting used.
It features an easy to use operating control panel including a LCD screen and 4 operator buttons.
All operating messages and information including functions lists, instructions, operating status, and
error messages are displayed in real time on the screen. Users can read and follow the
instructions to complete their jobs easily even without referring to this user manual.
The built-in Hard Disk Drive (HDD) on 7 and 11 target models allows users to load many Master
Discs into the HDD as source images. Loading disc images into the HDD will greatly improve the
duplicating quality and performance as well as increase the convenience of heavy duplicating jobs.
An intelligent and dynamic HDD management system will dynamically assign HDD partitions
according to each images actual capacity requirement. It will ensure flexible and efficient HDD
management.
The CopyBlastUltimate also includes advanced USB based source and target duplication
capabilities. USB based sources can be copied to a USB based target or to one or more target
discs. Disc sources can also be copied onto a USB based target. Append functions allow multiple
USB sources to be copied to disc, or a larger USB target.
FEATURES
☆ No PC needed. Independent SATA to SATA Multi-target CD/DVD/BD Disc or USB Duplication.
☆ Auto detect devices as soon as system power on.
☆ 2x16 LCD panel and 4 buttons and USB Source and Target slots on front control panel.
☆ Supports up to max. 40x CD, 24x DVD and 15x BluRay duplication to all targets simultaneously
depending upon configuration.
☆ Provides USB source to multiple disc target duplication, USB source to USB target append copy, and
disc to USB target bulk read capabilities.
☆ Auto Start copy. When the system detects source and blank discs are ready, the system will
automatically start duplicating.
☆ Special Synchronous Load and Copy technology – 7 and 11 target models only. When selected the
system will load the master source disc to HDD while copying disc to disc during the first production
cycle. In the subsequent copy cycles, the system will automatically copy from HDD instead of from the
source reader.
☆ Special Pre-Scan to evaluate the master source disc before copying to ensure a successful copy.
☆ Disc to disc “Test” Copy function to simulate real copy process.
☆ Disc to disc “Compare” function to ensure copy accuracy
☆ Supports all major disc types.
☆ Easy firmware update. Only required when advised by technical support.
To Next Page
Loading...