8.9.6 Show HDD Image name
8.9.7 Keep Buffer. Stores the current source disc if less than 128MB (64MB on 1 target model) to the
onboard buffer, allowing the source disc to be removed in subsequent copy cycles until the Copy
mode is exited. Default is No.
8.9.8 Boot Password
Under this operation, you can set a password for boot up system.
8.9.9 Setup Password
Under this operation, you can set the password to enter Setup (Menu 8).
8.9.10 Count Password
Sets a password to be entered when resetting copy counter (Menu 7.6.3)
8.9.11 Eject Tray If No Disc. If Yes all trays eject, even if empty, after copying has finished. Default No.
8.9.12 External USB HDD. Enables support for USB powered Hard Disk drives to be used as USB
Source or target.
8.10 USB Setup
8.10.1 Burn MultiDisc
8.10.2 Multi Session
9. HDD MANAGER
This menu allows you to perform various Hard Drive related operations.
9.1 Select Image. This function selects the specific image file used as the source. When an image is selected
from this menu the system will automatically set the source to HDD (Menu 6).
9.2 Disc -> Image. This is to load a Source Disc to HDD and save as image file.
9.3 Reader Speed. Sets the maximum Reading Speed of the master source disc when performing 9.2 Disc ->
Image function.
9.4 Show Image Info. Displays the selected image file information and file size.
9.5 Rename Image. You can rename image file name stored on the HDD. Each image can be renamed to an
alpha numeric name of 8 characters or less.
9.6 Delete Image. This is to delete the selected image file from the HDD.
Note: If the image file you wish to delete is selected as the current source, you will not be able to delete it
unless you go back to Menu 9.1 to re-select another file to be a source.
9.7 Show HDD Info. Check the information of the HDD, such as how many discs are stored and HDD
remaining space.
9.8 Format HDD. This feature will allow you to format the internal HDD. You will not be able to format the
HDD if the HDD image was selected as source (Menu 6). All disc images on the internal HDD will be lost.
9.9 Load & Copy. This function is specially designed for an easy way to synchronously load source disc to
Hard Drive while making disc to disc copying. Default is Off, other options are Synchronism and Load First.
10. USB COPY TOOL Source and target supports only FAT16/32 format.
10.1 Disc to USB. Initiates reading disc(s) onto the USB Target device. Audio CDs save tracks as .wav files
under unique folder names CD001, CD002, CD003…. etc. Data discs are saved under unique folder
names Disc001, Disc 002, Disc003…. etc. CopyBlastUltimate will copy the files from all discs in the tower
in turn automatically.
10.2 USB to Disc. Copies data files from USB Source to Disc(s). If Burn MultiDisc (Menu 8.10.1) is enabled
files will be burned simultaneously to 1 or more identical discs in the burners. If MultiSession (Menu 8.10.2)
is enabled more than one USB source can be copied in turn to disc(s)
10.3 USB to USB. Appends data files from USB Source to USB Target.
10.4 Format USB. Applies a FAT16/FAT32 format to the USB Target. All information on the USB Target is lost.
To Next Page
Loading...