How do I troubleshoot a bottom water temp failure on my evoheat Heat Pump?
If you are experiencing a bottom water temperature failure on your evoheat Heat Pump, it is likely due to the water bottom temperature sensor being open or short circuit. Check or replace the water bottom temperature sensor.
Critical safety alerts related to the installation process, covering qualified installers and earthing.
Important safety advisories for operating the heat pump, including fan safety and malfunction procedures.
Guidelines for safely moving and repairing the unit, emphasizing the use of authorized personnel.
Explains the thermodynamic process of the heat pump with a diagram and system theory.
Lists technical data, operating conditions, and key performance specifications of the unit.
Illustrates the water inlet, outlet, P&T valve, and other pipeline connections.
Specifies required spacing around the unit for proper airflow and maintenance access.
Details the electrical power connection requirements, including cable specifications and safety.
Step-by-step instructions for filling the water tank before operation.
Procedures for initial inspection and testing of the installed unit before full operation.
Lists common malfunctions, their causes, and recommended solutions for troubleshooting.
Important safety warnings regarding pressure, temperature, and hydrogen gas risks.
To Next Page
General
