Evolur SANTA FE - Crib Assembly - Step 5: Headboard; Aligning Headboard to Side Panels; Securing Headboard with Bolts

13
www.evolurbaby.com/help
Bolt 1-3/4” (×2)
E
Bolt 2-3/8” (×2)
G
(E)
(E)
(E)
(E)
(G)
(G)
5
CRIB ASSEMBLY - HEADBOARD ASSEMBLY
5a. Align the Headboard
(7) to the previously
assembled Left and
Right Panel as shown
in the diagram.
5b. Insert the bolts (G)
inside the holes
provided at the
bottom of the
Headboard on both,
as shown. Similarly,
insert the bolts (E) at
center and top holes
on the Headboard.
Follow the same
procedure on both
the sides of
Headboard.
5c. Ensure that the
alignment is right and
Panels are firm
before you start
using the crib. Do not
overtighten.