Evolur SANTA FE - Crib Assembly - Step 1: Front Legs; Aligning Front Legs to Footboard; Inserting and Tightening Bolts

9
www.evolurbaby.com/help
Bolt 2-1/2” (×4)
A
Bolt 1-3/4” (×2)
E
(E)
(E)
(A)
(A)
(A)
(A)
(1)
(2)
(3)
1
CRIB ASSEMBLY - FRONT LEGS ASSEMBLY
1a. Align the Left Front
Leg (3) towards the
left end of the
Footboard (1).
Similarly, align the
Right Front Leg (2)
towards the right end
of the Footboard (1).
1b. Insert the Bolts (A) at
the lower and upper
holes of the Left and
Right Front Legs as
shown in the diagram.
1c. Insert the Bolts (E) at
the middle of the Left
and Right Legs, as
depicted in the
diagram.
1d. Tighten the Bolts (A)
and (E) using the Allen
Key (C) provided.