HD uDTA Remote Control
TV Input
*
Toggle TV Input
Info
View the channel name
and number, date and time
Page Up
For future use
Menu
Display the Main Menu
OK
Select a highlighted item
within Menus. Display channel name
and number, date and time
Volume
Audio up & down
Guide
For future use
Yellow A
Toggle to secondary language
(if available)
*TV must be programed with the remote
LED Indicator
Button press and special
command indication
TV Power
*
Turn your TV on or off
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
For future use
Channel
Channel up & down
Mute
Sound on & off
Red C
Toggles through available
closed captioning
Setup
Program your remote control to your
STB and TV
NOTE
•Wheninsertingbatteries, make sure that the polarity (+/-) is correct.
•TheLEDonthetopoftheremoteisavisualindicatorthatconrmstheremotehaspower
when a button is pressed.
•Yourremotemayvary slightly from the one pictured here. However, basic functions
should remain the same.
To force remote control to send volume
control commands to the TV
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume up button
To force remote control to send volume
control commands to the HD STB
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down button
Note: Refer to the Remote Control Programming and Operating instructions, provided with your remote control, to program your remote to work on your TV and
for more detailed information regarding pairing your remote.
To Next Page
Need help?
General
