Evolve GTS9 - Page 12

1. Take the treadmill, instrument and accessories out of the packing box (Figure
1), and then remove the two fixing screws while holding the column and slowly pull
them to the fixing screw holes (Figure 2). Fix the column on the base with M8*20
screws, M8*55 screws and M8 flat washers (Figure 3). Use M8*20 screws and M8
flat washers to fix the electronic watch on the column (Figure 4).
&MFDUSPOJDXBUDIJOTUBMMBUJPOJOTUSVDUJPOT
'JHVSF'JHVSF
'JHVSF'JHVSF
.TDSFXT
.BUXBTIFST
.TDSFXT
.BUXBTIFST
.TDSFXT
.BUXBTIFST
11 www.evolve-fitness.eu