1. Remove the packaging fixing piece that fixes the frame and the base, being careful
not to injure people when the frame bounces. Use M4*15 screws to fix the left and right
side covers on both sides of the base and need to be locked (Figure 1).
$PMVNOBOEMFGUBOESJHIUTJEFDPWFSBTTFNCMZ
.TDSFXT
3.1 The safety lock is placed on the yellow position of the
electronic watch.
3.2 The assembly is completed (Figure 5).
3.3 Finally, after all the accessories are assembled,
Please make sure all screws have been tightened before
can use.
0UIFSQBSUTBTTFNCMZ'JHVSF
www.evolve-fitness.eu 12
To Next Page
Loading...