Evolve ShowerStart Express

To Next Page

Express Port purges cold water

up to 4x faster

option to collect for later use

1. Turn on Shower

3. Ready When You Are

Press lever (or pull optional cord)

to begin showering

evolve

™

ShowerStart

Express

How ShowerStart Express Works

FASTER HOT WATER – WARM UP FREEDOM – SAVE HOT WATER

2. Warm-Up Freedom

Auto-pauses once hot water arrives

so you can multitask without empty

shower running on and on

2. Position ShowerStart Express

vertically and tighten to the

shower pipe with a wrench.

No plumbers tape required.

3. Attach Pull Cord

optional

1. Hand tighten Shower Head onto

Express. Note, If no gasket seal is

present in shower head, apply

plumber's tape to threads

Installation on a Standard Shower Arm

CAUTION: Water exiting Express Port should not hit:

• hot/cold water controls

• shower door or curtain

• lip of tub

4. Aim the Express Port using

swivel adjustment to eliminate

splashing and leaks. Direct water

exiting port towards interior wall

(shower) or interior tub side wall

(tub/shower combo).

Need help?

Do you have a question about the Evolve ShowerStart Express and is the answer not in the manual?

Summary

How ShowerStart Express Works

Turn on Shower

Warm-Up Freedom

Ready When You Are

Installation on a Standard Shower Arm

Hand tighten Shower Head

Ensure seal; apply plumber's tape if no gasket seal is present.

Position ShowerStart Express

Tighten vertically to the shower pipe with a wrench.

Aim the Express Port

Important Safety Information

Not an Anti-Scald Device

ShowerStart Express is not an anti-scald device.

Prevent Scalding Accidents

Lower water heater temperature; water above 120°F causes burns.

Check Temperature Before Showering

Always resume water flow and check temperature before entering.

Health and Reproductive Warning

Cancer and Reproductive Harm

Warning regarding Cancer and Reproductive Harm. See P65Warnings.ca.gov.