15
4. Screw the four screws on the battery cover until they
are tight.
INSERTING A SIM CARD AND A MICROSD MEMORY
CARD
1. Remove the four screws on the battery cover.
2. Remove the battery cover.
3. Remove the battery.
4. Insert the SIM card(s) / MicroSD card into the slot
marked SIM 1(2) / MicroSD.
5. Check that the rubber seal is correctly fitted.
6. Screw the four screws on the battery cover until they
are tight.
BATTERY CHARGE
Connect the charger to the USB connector. Charging
starts automatically. The phone can be charged both on
and off
Condition. The battery level is indicated on the phone
screen.
SWITCHING YOUR PHONE ON/OFF
Press and hold the end of call button (7) for 3 seconds.
UNLOCKING/LOCKING THE KEYPAD
To wake up your phone, press the left function button (3)
or the end call button (7). Then press the left function
button (3) and then the * button (17) to unlock. To lock
the keypad, press the end of call button (7) briefly. You
To Next Page
Loading...
