27
DATETIME=2017/01/01 00:01:53
CAM_NAME=Name
Commands description:
UPDA
TA=0 // Turn setting changes on and off 0 = Off, 1 = On. If you want to save the
changes to this file to the device, it is necessary to override this parameter to 1.
MO
DE=3 // Mode setting, the available values are: 1, 2, 3 or 4;
1 for photos only,
2 for video recording,
3 for taking photos and recording videos,
4 time-lapse
The
default value is 3.
TI
MELAPSE INTERVAL=1//
The interval of the time-lapse (in minutes)
1: 5 min
2: 30 min
3: 60 min
The default value is 1.
PIC
TURE RESOLUTION=1 //
Photo resolution setting, the available values are 1, 2 or 3.
1: 20MP
2:16MP
3: 12MP
STILL_
SHOT_NUM=1 //
The number of photos taken when the camera is activated, the available values are: 1, 2, 3 or 4,
1:1
2:3
3:6
4:9
The default value is 1.
VIDEO_RESOLUTION=1 //
Video resolution setting, the available values are: 1, 2, 3
1: 1080P
2:720P
3: VGA
The default value is 1.
To Next Page
Loading...
