What to do if Evomed Fitness Equipment unit fails to turn on?
If your Evomed Fitness Equipment unit isn't turning on, try the following: First, press and hold the (+) button for 3 seconds. If that doesn't work, check that the battery is correctly placed with the (+) side facing up and touching the contact points. If it still fails, the battery might be old and need replacing.
Why does my Evomed Painmate HW-P105 unit beep abnormally during treatment?
An abnormal beeping sound during treatment with your Evomed Fitness Equipment can occur for several reasons. The battery may be running low and needs replacement. Alternatively, the device might not be securely fixed to your skin. Try re-applying the pad and pressing the (+) button to increase the intensity. You can also try turning the unit off by pressing and holding the (-) button for 3 seconds, and then turning it back on by pressing and holding the (+) button for 3 seconds.
What to do if gel pads on Evomed Fitness Equipment are no longer sticking to the body?
If the gel pads on your Evomed Fitness Equipment aren't sticking, try cleaning the gel pad with a drop of water on your finger. If that doesn't solve the problem, consider replacing the gel pad.
What to do if I cannot feel the Evomed Painmate HW-P105 Fitness Equipment device working?
If you can't feel your Evomed Fitness Equipment device working, first press and hold the (+) button for 3 seconds. Also, make sure the gel pads do not overlap. Finally, increase the intensity gradually.
Why does the intensity suddenly begin to drop on my Evomed Painmate HW-P105 Fitness Equipment?
General| Category | Fitness Equipment |
|---|---|
| Model | HW-P105 |
| Brand | Evomed |
| Product Name | Painmate |
| Type | TENS Unit |
| Channels | 2 |
| Modes | 6 |
| Intensity Levels | 20 |
| Battery | Rechargeable Lithium-ion |
| Battery Life | Up to 10 hours |
| Charging Time | 2-3 hours |
| Warranty | 1 Year |
Place device where pain is felt. For optimum results, move device to a nearby location after 20 minutes.
To Next Page