2
Determine the finished height and position that you want the appliance to be
located. Then secure the wall bracket to the wall in the position you need using
the wall plugs and screws provided. If you’re not securing the appliance to a
masonry wall you will need to use the appropriate fixings.
3
You can now hang the appliance on the wall by slotting the tabs of the wall
bracket into the slots on the back of the appliance. Connect the appliance to
the mains power supply and it is ready to use.
10
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1 S&S ISS. 17S&S ISS. 17
To Next Page
Loading...