MAINTENANCE
.081/02-15 1-16
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE CORRECTIVE ACTION
DRIVE OVERHEATING
Oil level too low.
Oil level too high.
Fill to correct level.
Check for condensation or
water present in oil
reservoirs.
Low oil level in high speed
gear case.
Fill to proper level.
BROKEN SHEAR PINS
OR ALARM BEING SET
OFF
Solids build-up in tank Drain tank and clean.
Large debris in tank Drain tank and remove.
Grout on tank floor raised. Drain tank, repair floor and
regrout.
Damaged/missing stop
blocks.
Refer to H-Drive Bearing
check poin sheet.
Scraper making contact
with tank floor.
Drain tank and adjust
properly. Check for proper
retaion of scraper for
correct clearance.
Bridge being locked down. Loosen and check
expansion slots for
movement.
SKIMMER NOT
SKIMMING PROPERLY
Blade not adjusted correctly Adjust blade so it makes
full contact with beach.
Build-up of material on
beach.
Clean and remove fibrous
material.
To Next Page
Loading...