RackMountingInstructions
The following or similar rack-mount instructions are included with the installation instructions:
Elevated Operating Ambient
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient. Therefore, consideration should be given to installing
the equipment in an environment compatible with the maximum ambient temperature specified on the
apparatus.
Reduced Air Flow
Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to
uneven mechanical loading.
Circuit Overloading
Consideration should be given to the connection of the equipment to the supply circuit and the effect
that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing
Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given
to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
The equipment intended for installation should be placed in Restricted Access Location.
There will be risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions. After performing any installation or servicing, make
sure the enclosure is correct in position before turning on the power.
This unit may have more than one power supply. Disconnect all power sources before
maintenance to avoid electric shock.
HARDWARE MANUAL
TR-PMA2-6801S | 2021-31-08 | 9
To Next Page
Loading...