AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
The AirKey Cloud Interface is an interface (API) for third-party systems
based on REST. The interface allows certain AirKey functions to be
controlled via third-party software.
The RS485 interface is a standardized interface that can be used to
transmit data. With an AirKey wall reader, the last successful access can
be forwarded to third-party software via this interface.
APDU stands for Application Protocol Data Unit and is used here in the
document for the RS485 interface. It describes a data packet which is
transmitted via the RS485 interface.
Describes a function of the AirKey Online Administration. An administrator
can quickly create new smartphones and assign authorisations or edit
existing authorisations of smartphones. The smartphone owner receives
an SMS which automatically registers the smartphone for AirKey.
Two-factor
authentication
The two-factor authentication (2FA) is used as an additional security level
when logging into the AirKey Online Administration. In addition to the user
ID and password, an SMS code is requested as a second factor at the login.
Describes a process in which an action can only be performed by an
additional person. In AirKey, this principle can be used to protect personal
data in the event logs.
Software program that runs on locking components so that they can
perform their AirKey function. The firmware of locking components can be
updated in the form of firmware updates.
In the AirKey system, "Keyring" is the name of a software program that
manages all AirKey-relevant data stored on passive access media such as
cards, key fobs, combi keys, and wristbands.
If a new Keyring version is available in the AirKey system, the media can
be updated with a smartphone with maintenance authorisation or with a
coding station.
Displayed within the AirKey Online Administration for locking components
that are not up to date. Only when all maintenance tasks of an AirKey
access control system have been finished is the system updated and safe.
Maintenance
authorisation
Smartphones can exclusively be used to add or delete components (media
and locking components) in the access control system if they have been
granted a maintenance authorisation. AirKey maintenance engineers can
also operate locking components in factory state using smartphones with
maintenance authorisations.
Activate the maintenance authorisation for the desired smartphone in the
AirKey Online Administration.
To Next Page
Loading...