EVVO INTENSA 20 - Trouble Removal; No Steam Issues; Coffee Quantity Issues; Milk Foaming Quality Issues

CAFETERA ESPRESSO EVVO INTENSA 20/20S
27
ENGLISH
No steam Plug the steam out-
let
Milk frothing bu-
tton is not on or
preheating is not
completed to turn
on steam
Use a small wire throu-
gh the steam hole
Clean the steam pipe
with hot water after
foaming.
Turn on the Milk fro-
thing button, and wait
for the preheating
to complete before
steam
More or less
Coffee
Too much or too
little coffee powder
According to the stan-
dard amount of pow-
der, 1 cup with 1 ta-
blespoon to pressure,
coffee powder can not
be too thick or too ne.
Too thick coffee can
not be completely ex-
tracted, too ne affect
the amount of coffee.
The milk
does not
foam well
whether it is whole
milk
Before the steam
key is warmed up, it
starts to milk
Use whole milk
Steam can only be
started after the steam
indicator light turns
from ashing to cons-
tant light.
No coffee, co-
ffee light and
steam light
ash
The temperature is
too high after stea-
ming
Water cooling