Why EWheels Medical Wheelchair has no power?
If your EWheels Medical Wheelchair has no power, there are several potential reasons: * The controller system power might not be connected. Ensure the battery is properly connected. * The CPU and joystick may not be properly connected. Check that all connections between the joystick, CPU, and battery are securely tightened. * The battery power could be too low. In this case, charge the battery.
Why is EWheels Medical Wheelchair noisy when turning?
If your EWheels Medical Wheelchair is noisy or vibrating when turning, it could be due to: * The speed being set too low. Try raising the speed, as the motor may sound or feel strained at low speeds. * The motor being damaged, in which case you should replace it.
General| Weight Capacity | 400 lbs |
|---|---|
| Turning Radius | 31" |
| Ground Clearance | 3" |
| Motor | Brushless Motor |
| Controller | Joystick |
Covers general safety, pre-operation checks, entering, driving, and exiting procedures.
Adherence to weight limits and safe transport procedures in vehicles.
Warnings against water, stairs, vehicles, and environmental hazards.
Checking frame, wheels, armrests, and battery care for longevity.
Using correct fasteners and avoiding unauthorized changes.
Listing package components and initial unfolding instructions.
Potential interference affecting wheelchair operation.
Steps for locking the seat and installing the joystick controller.
Connecting batteries and placing them in the battery box.
Understanding controller buttons, indicators, and driving advice.
Ensuring power is OFF before sitting and powering on.
Operating the joystick, stopping, and safely exiting.
Detailed instructions for the initial battery charging process.
Charger indicators, secondary charging method, and battery details.
Battery care, storage, disposal, and engaging free wheel mode.
Steps for folding the wheelchair and using the cross bar to move it.
Addresses power, noise, charging, and controller connection problems.
Explains normal operation light and flashing error codes.
Details warranty periods, what is covered, and what is excluded.
To Next Page