Changing Tires & Tubes
Make sure the Tires are DEFLATED before removing anything.
Its going to be a 22mm socket and rachet that
will be used to take of both rear wheels when
changing the tubes.
Mae sure to have a 5mm Allen wring or
socket as shown in photo to split the rim.
Once all 3 have been removed you can split
the rim into 2 parts. Be careful as a spacer
might fall out from center.
For the front tube & tire the nut will be
the 22mm socket or wrench to take it off
front forks. Be carful of the motor wire
when doing so as well.
To Next Page
Loading...
