Page 11
Using the smartphone application, you can adjust the maximum effort you do not want
Ewincher to exceed. Ewincher has a factory setting 23kg maximum effort.
During your maneuver, if the maximum effort exceeds the value that you set, an orange
LED light will blink several times and your Ewincher will temporarily cut the electrical
assistance. You can then continue your maneuver using the winch's 2nd speed, for
example.
Torque limiter
The handle is equipped with a thermal circuit breaker to :
• Improve user safety
• Extend the product's lifetime
When the internal temperature of the handle is too high, the safety mechanism turns on
and the red LED light stays on. Wait a little while and you'll be able to use your Ewincher
again once the temperature has gone down enough. To power it on, remove and insert the
battery.
Thermal Circuit breaker
Battery charge level
When the battery charge is weak, the red LED light blinks.
When the battery is completely discharged, the red LED light stays lit a little, then the
machine gets off.
You must then recharge the battery following the instructions in this manual. To preserve your
battery shelf life we recommend to recharge afteryour day sailing, don’t wait it is empty.
For more information about operating your handle, you can watch various instructional
videos on our website (www.Ewincher.com) and our YouTube channel.
Video instructions
Product labels
The encoded date of manufacture, which also includes the year, is printed on the product
label that is located on the surface that serves as a hinge between the handle and the
battery pack.
Example for products made in 2020 :
BXX 2020 XX-XX
Year of manufacture
EXX 2020 XX-XX
Year of manufacture
or
Special features
Important information
To Next Page
Loading...